manualshive.com logo in svg

HydraMaster Boxxer 318HP, Руководство пользователя

Поделиться
Скачать
HydraMaster Boxxer 318HP Скачать руководство пользователя страница 12

   General Information:  1-4

During the operation of the truckmount many components are in motion. Never 
touch any part of the truckmount that is in motion. Serious injury may result.

During the operation of the truckmount many surfaces will become extremely hot. 
Never touch hot surfaces. Serious injury may result.

The operation of this truckmount can produce noise levels exceeding 85 decibels 
to a distance of 10 feet. The Occupational Safety and Health Administration 
(OSHA) recommends the use of hearing protective equipment if a person is 
exposed to an average of 85 decibels over an eight hour period. Check with local 
and state agencies concerning hearing conservation rules.

During the operation of the truckmount carbon monoxide and other toxic fumes 
are produced. Position the vehicle so that any fumes produced will be directed 
away from inhabited areas and any points of building entry (doors, windows, air 
conditioning units, fans, etc.). Do not occupy the vehicle while the truckmount is 
in operation. Serious injury may result.

During the operation of the truckmount chemicals known to the State of California 
to cause cancer, birth defects and other reproductive harm are produced by the 
engine exhaust.

Never operate the truckmount with a portable gas container inside the vehicle. 

Doing so will increase the risk of fire and explosion. Serious injury or death my 

result.

Transporting a vented fuel container that presently contains, or has ever contained 

in the past, a flammable liquid is strictly forbidden by HydraMaster and by federal 

and state regulations. Doing so will increase the risk of fire and explosion. Serious 

injury or death may result.

Содержание Boxxer 318HP





























































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды