manualshive.com logo in svg

HydraMaster Boxxer 318HP, Руководство пользователя

Поделиться
Скачать
HydraMaster Boxxer 318HP Скачать руководство пользователя страница 15

1-7:  General Information

RESPONSIBILITIES 

The Purchaser’s Responsibilities

Prior to purchasing a van, ensure that the payload is suitable for all of the equipment that will 
be installed and transported. This includes and is not limited to: the truckmount, recovery 
tanks, fresh water tanks and any other on-board water, hose reels, hoses, cleaning tools, 
chemicals, drying equipment, etc. Payload capacity information is available through the 
auto dealer, the manufacturer’s web site, and is also located on the door pillar of the 
driver’s side door.

Purchase a heavy duty Group 24 battery for this truckmount. This is normally available 
from the installation dealer.

Prior to dropping your van off at the distributor for the truckmount to be installed, have a 

spray-on bed liner applied to the floor such as Rhino Lining® or Line-X®.

Prior to operating the truckmount read this manual in its entirety and familiarize yourself 
with the information contained here. Special attention should be paid to all cautions and 
warnings.

The distributor is responsible for the correct installation of the truckmount. The distributor 
is also responsible to train you in the correct and proper operation and maintenance of 
the truckmount. 

Any modification of the truckmount may void the warranty.

The Distributor’s Responsibility

Acceptance of Shipment

Before accepting the truckmount, check the following:

•  The truckmount should be free from any damage during shipping. Do not sign the 

delivery receipt until you have closely inspected the truckmount and noted any damage 
on the delivery receipt. Hidden damage may be present even if the box looks okay. It 
is recommended that the box be opened before signing for the shipment.

•  Check the packing list and verify that all items are accounted for.

Содержание Boxxer 318HP





























































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды