manualshive.com logo in svg

HydraMaster Boxxer 318HP, Руководство пользователя

Поделиться
Скачать
HydraMaster Boxxer 318HP Скачать руководство пользователя страница 34

   Cleaning Information:  3-6

CLEANING TOOL TIPS

Wands

With a wand, keep cleaning strokes short, front to back, and run a “dry pass”.

After pulling the wand for a strip of 3 or 4 ft long with the solution trigger activated, go back 

up to the top of the stroke, and make a “dry “ pass [i.e. no solution flowing]. This gives the 

wand a second chance to pick up the solution on the carpet.

If you do not run a dry pass, the carpet can take longer to dry, and, possibly, the pad under 
the carpet can become saturated.

Be aware of the carpet seams; try to use strokes that are parallel with the seam. Avoid 
pulling the wand across the seam. Every stroke can peel the seam connection and pull 

the carpet off the floor.

Also, tilt the wand handle down [head up] to move the tool forward, and away from you, 

on the carpet. This means less pull on the carpet and less work for you.

Содержание Boxxer 318HP





























































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды