25
04/05
ID# 21179004
14.
13.
48
28
64
55
Install spacers (28) onto backboard
brackets (48) with bolts (64, 46),
washers (20) and lock nuts (55, 47) as
shown.
35
37
42
40
35
48
42
Assemble lower elevator tubes (35) as shown.
40
20
47
20
46
46
47
28
44
Tighten bolt (40) in
locknut (37) until flush
(even) with the outer
edge of the locknut.
NOTE:
IMPORTANT!:
IT IS NECESSARY FOR
ALL PARTS TO BE
INSTALLED FOR THIS
MECHANISM TO WORK
SAFELY AND PROPERLY.
37
Test fit bolts into holes of the
brackets (48) and carefully
rock them in a circular
motion to ream out paint
from the holes if necessary.
NOTE:
