9
04/05
ID# 21179004
While maintaining alignment, bounce assembly and lower section (3) together as shown until
they no longer move toward taped reference mark.
1
2
3
3.
WOOD SCRAP
(NOT SUPPLIED)
TAPE REFERENCE
MARK
POLE SECTIONS
SHOULD HAVE A
3-1/2" (9 CM) MINIMUM
OVERLAP.
NOTE:
IMPORTANT!:
Holes in the top (1) and
bottom pole (3) sections
MUST align correctly to
position the elevator system
toward the playing surface.
IMPORTANT!:
Smaller holes (11/32"\0.87 cm)
in the top pole section should
face toward the front of the
system.