11
01/03
P/N 211348D
17.
25
39
40
Insert spacer (20) through rim assembly (25). Place rim assembly on bracket (39) so that carriage bolt (41) is
inserted through hole on top of inner bracket (40). Install hex bolt (44), washers (27) and nut (42) through top
holes on bracket (39) through spacer (20) as shown.Tighten completely.
Install rubber grommet (28), concave washer
(29) and center lock nut (30) to carriage bolt (41)
as shown.
28
41
30
29
BOTTOM VIEW
20
25
41
Do not over tighten as rim will not flex
properly. See leveling instructions to
determine how much to tighten nuts
(42) and (30).
18.
44
27
27
20
42
NOTE
27
