Hydor Hydroset T03300, Руководство пользователя

Страница: 4 / 24

4 Italiano
! !
PRELIMINARY WARNINGS
• This appliance is intended for indoor use only and it is designed
to operate in fluids with a temperature of max. 35° C.
• Verify that the voltage of the mains corresponds to the voltage
shown on the unit’s label.
• Before connecting to the mains supply be sure that the cord
is not damaged.
• The cord of this appliance cannot be replaced or repaired; in
case of damage the entire unit must be replaced.
• This appliance can be used by children aged from 8 years and
above and persons with reduced physical, sensory or mental
capabilities or lack of experience and knowledge if they have
been given supervision or instruction concerning use of the
appliance in a safe way and understand the hazards involved.
• Children shall not play with the appliance.
• Cleaning and user maintenance shall not be made by children
without supervision.
• Keep the appliance and its cord out of reach of children less
than 8 years.
IMPORTANT - Within the European Union, a crossed-out wheelie bin symbol on the product, documentation or
packaging indicates that the product cannot be disposed of in the regular household waste stream, in compliance
with EU Directive 2012/19/EC and with current local regulations. The product must be disposed of at recycling
centres or authorised waste disposal centres for electrical and electronic equipment, in accordance with current
legislation in the country where the product is found. Incorrect disposal of this type of waste can have a negative impact
on the environment and human health, caused by the potentially hazardous substances produce by electrical and electronic
equipment. Correct disposal of these products will also contribute to the efficient use of natural resources. Further information is
available from the product retailer, the competent local authorities and national manufacturer’s organisations.
AQUARIUM THERMOSTAT is an electronic thermostat for the control of water temperature in aquarium and air temperature in
terrariums. It is very easy to use and it can be connected to any heating cable, heating mat or other heater with a maximum
power of 500W.
INSTALLATION
ATTENTION : BEFORE ANY INTERVENTION OR MAINTENANCE IN THE AQUARIUM, DISCONNECT ALL SUBMERSED ELECTRICAL
APPLIANCES FROM THE MAINS. VERIFY THAT THE VOLTAGE REPORTED ON THE PRODUCT CORRESPONDS THAT OF YOUR MAINS
SUPPLY.
Place THERMOSTAT in a position so that it cannot fall into the water. We recommend that you fix it with some double sided
adhesive tape. Insert the probe into the suction cup ring, fix it to the tank side where there is a good water circulation -Fig.2-.
In the case of a terrarium, it will be necessary to identify, based on your needs, the most suitable point for measuring the
temperature -Fig. 3-. Connect the heating element, heating cable, mat or heater to THERMOSTAT socket and finally connect
the thermostat to the mains supply.
4 English