FluidAqua Mobil - FAM 10
FAM Description
HYDAC FILTER SYSTEMS GMBH
en(us)
Page 20 / 72
BEWA FAM10 3549460a en-us 2011-05-05.doc
2011-05-05
Performance
The FAM is able to reduce the water content of those fluids described in the chapter
"Suitable fluids" to less than 100 PPM.
Typical dewatering rates:
FAM 10
≈
0.8 l/h
FAM 10/15
≈
1.0 l/h
The dewatering speed is dependent on:
Dewatering rate
Water content
Fluid temperature
Detergent additives
Volumetric flow of the FAM
As an approximate guideline, the dimensioning of the FluidAqua Mobil can be
defined in accordance with the tank volume.
Tank volume in liters
Filter Size
< 2,000
FAM 10
2,000 – 7,000
FAM 10/15
Note that free water, e.g. on the bottom of the tank, can have an influence on the
entire water content in the system. Drain off free water before taking a sample.
For the determination of the water content, the sample should be extracted from the
system to be cleaned at a test connection during operation if at all possible.
