Hydac FCC-CM 5/15 Скачать руководство пользователя страница 5

Страница: 5 / 60

Preface

FCC-CM

en(us)

Page 5 / 60

BEWA FCC-CM 3648206 en-us 2016-07-08.docx

2016-07-08

Preface

These operating instructions were made to the best of our knowledge. Never-

theless and despite the greatest care, it cannot be excluded that mistakes

could have crept in. Therefore please understand that, in the absence of any

provisions to the contrary hereinafter, our warranty and liability – for any legal

reasons whatsoever – are excluded in respect of the information in these op-

erating instructions. In particular, we shall not be liable for lost profit or other

financial loss. This exclusion of liability does not apply in cases of intent and

gross negligence. Moreover, it does not apply to defects which have been

deceitfully concealed or whose absence has been guaranteed, nor in cases

of culpable harm to life, physical injury and damage to health. If we negligent-

ly breach any material contractual obligation, our liability shall be limited to

foreseeable damage. Claims due to Product Liability shall remain unaffected.

Technical Support

Contact our technical sales department if you have any questions on our

product. When contacting us, please always include the model code, serial

no. and part no. of the product:
Fax:

+49 6897 509 9046

E-mail:

[email protected]

Product modification

We would like to point out that changes to the product (e.g. purchasing addi-

tional options, etc.) may mean that the information in the operating instruc-

tions is no longer applicable or adequate.
After modification or repair work that affects the safety of the product has

been carried out on components, the product may not be returned to opera-

tion until it has been checked and released by a HYDAC technician.
Please notify us immediately of any modifications made to the product

whether by you or a third party.

Warranty

For the warranty provided by us, please refer to the General Terms of Sale

and Delivery of HYDAC FILTER SYSTEMS GMBH.
You will find these under www.hydac.com -> General Terms and Conditions.

Содержание FCC-CM 5/15





























































Результаты поиска

Содержание FCC-CM 5/15

Отзывы:

Бренды по названию

Популярные бренды

Hydac FCC-CM 5/15, Инструкция по эксплуатации и техническому обслуживанию

Результаты поиска

Содержание FCC-CM 5/15

Отзывы:

Бренды по названию

Популярные бренды