12
EDS
300
Status: 19.09.2018
HYDAC ELECTRONIC GMBH
Part No.: 669648 E
10 Programming enables
The unit has 2 types of programming enable which must both be set to "ON " to change the
settings. The operating programming enable can be set or cancelled during operation. It provides
protection against inadvertent changes to the unit's settings.
A programming disable via the main programming enable has the effect that no change to the
settings can be carried out during operation. This serves, for example, as a safety function or as
protection against unauthorised alterations.
10.1 ALTERING THE OPERATING PROGRAMMING ENABLE
mode
mode
3 s
pressure
3 s
press both arrow
keys simultaneously
and hold down for 3 s
use
or
to alter setting,
OFF
ON
= programming disabled
= programming possible
display
(release
arrow keys)
display
10.2 ALTERING THE MAIN PROGRAMMING ENABLE
Switch off supply voltage or disconnect the unit from the supply voltage.
mode
mode
3 s
pressure
3 s
display
press both arrow
keys simultaneously
and hold down.
use
or
to alter setting,
OFF
ON
= programming disabled
= programming possible
(release
arrow keys)
Switch on supply
down for 3 s)
voltage (hold keys
"main program state"
display
Note:
•
If a setting has been changed "
PRG
" is displayed briefly when the display is switched
over. The new setting is then saved in the unit.
