HYDAC International MRF 2 NU, Инструкция по эксплуатации и техническому обслуживанию

Страница: 7 / 20

MRF 2 NU MultiRheo Filter
1 General Safety Guidelines
These operating instructions contain the key instructions for properly and safely operating the
MRF.
1.1 Obligations and Liability
•
The basic prerequisite for the safe and proper handling and operation of the MRF is
knowledge of the safety instructions and warnings.
•
These operating instructions in general, and the safety precautions in particular, are to be
adhered by all those who work with the MRF.
•
Adherence is to be maintained to pertinent accident prevention regulations applicable at
the site where the MRF is used.
•
The safety precautions listed herein are limited solely to using the MRF.
The MRF has been designed and constructed in accordance with the current state of the art
and recognized safety regulations. Nevertheless, hazards may be posed to the life and limb
of the individual using the unit or to third parties. Risk of damage may be posed to the unit or
other equipment and property. The MRF is to be used as follows:
•
solely for its designated use
•
only when in a safe, perfect condition
•
Any faults or malfunctions which might impair safety are to be properly repaired or
remedied
immediately .
Our General Terms and Conditions apply. They are made available to the owner upon
concluding purchase of the unit at the latest. Any and all warranty and liability claims for
personal injuries and damage to property shall be excluded in the event they are attributable
to one or more of the following causes:
•
improper use of the MRF or use deviating from its designated use
•
improper assembly, installation, commissioning, operation and maintenance of the MRF
•
operating the MRF when the system equipment or systems are defective
•
modifications to the MRF made by the user or purchaser
•
improper monitoring of unit components subject to wear and tear
•
improperly performed repair work
1.2 Explanation of Symbols and Warnings, etc.
The following designations and symbols are used in this manual to designate hazards, etc.:
HYDAC Filtertechnik GmbH
en
Page 7
BeWa MRF2NU 3341025 en.doc 2007-09-24