HYDAC FILTER SYSTEMS OLFP-6 /X-G/-T001, Инструкция по установке и обслуживанию

Страница: 7 / 48

Safety Information
Safety Information
The device was built according to the statutory provisions valid at the time of
delivery and satisfies current safety requirements.
Any residual hazards are indicated by safety information and instructions and
are described in the operating instructions.
Observe all safety and warning instructions attached to the unit. They must
always be complete and legible.
Do not operate the unit unless all the safety devices are present.
Secure the hazardous areas which may arise between the unit and other
equipment.
Maintain the unit inspection intervals prescribed by law.
Document the results in an inspection certificate and keep it until the next
inspection.
Hazard symbols
These symbols are listed for all safety information and instructions in these
operating instructions which indicate particular hazards to persons, property or
the environment.
Observe these instructions and act with particular caution in such cases.
Pass all safety information and instructions on to other users.
General hazard
Danger due to operating pressure
Exposed electrical components
Danger of electrical shock
OLFP-6 /X-G/-T001
en(us)
Page 7 / 48
MoWa OLFP-6-x-G-T001 4113643 en-us 2016-04-11.docx 2016-04-11