HYDAC FILTER SYSTEMS OLFP-6 /X-G/-T001, Инструкция по установке и обслуживанию

Страница: 37 / 48

Performing maintenance
12. Put the filter cover on top of
the filter housing. Make sure
that the position is correct.
13. Put the 8 screws with washers
for the filter cover in the bore
holes and screw on the nuts
with washers below by hand.
Tighten the eight 24 mm
(wrench size) screws with a
torque of 120 Nm.
To keep the screws
operating smoothly, we
recommend assembly paste.
OLFP-6 /X-G/-T001
en(us)
Page 37 / 48
MoWa OLFP-6-x-G-T001 4113643 en-us 2016-04-11.docx 2016-04-11