Preparing the unit for operation
Connecting electrically (230 V or 110 V, single phase)
For the 110 / 230 V single phase version, the filtration unit is supplied ready
for connection with a plug.
DANGER
Electric shock
Danger of fatal injury
►
Pull power plug before performing any work.
►
Work on electrical units may only be done by
authorized technical staff.
Remove the connector cable from its holder and unwind it completely.
Before plugging in the power plug, make sure that the on/off switch is in the
0 or OFF position.
Plug the power plug into a suitable power outlet.
Check that the voltage and frequency are correct. Refer to the electrical data
indicated on the motor type label.
Switch the filtration unit on or off using the switch on the motor terminal box.
The filtration unit has a motor protection switch to protect it from electrical
overload.
OF7S / OF7K
en(us)
Page 35 / 68
BeWa OF7 3430048e en-us 2016-04-28.doc
2016-04-28