manualshive.com logo in svg

Hyd-Mech S20 SERIES III, Руководство пользователя

Поделиться
Скачать
Hyd-Mech S20 SERIES III Скачать руководство пользователя страница 8

0.4

BASIC RULES

Intended Use

Our machines are designed and built in line with the state of the art, and specifically in accordance with 

American National Standards Institute Standard B.0 

Safety Requirements for Metal Sawing Machines.

However, all machines may endanger the safety of their users and/or third parties, and be damaged, 

or damage other property, if they are operated incorrectly, used beyond their specified capacity, or for 

purposes other than those specified in this Manual.

 

Exclusion of Misuse

Misuse includes, for example:
Sawing hazardous materials such as magnesium or lead

Sawing work pieces which exceed the maximum workload appearing in the Specifications

Operating the machine without all original safety equipment and guards

Liability

The machine may only be operated:
when it is in good working order, and
when the operator has read and understood the Safety and Operating Instructions Sections of the Manu-

al, and
when all operations and procedures are in compliance with this Manual.
Hyd-Mech Group cannot accept any liability for personal injury or property damage due to operator errors 

or non-compliance with the Safety and Operating Instructions contained in this Manual.

Содержание S20 SERIES III



















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды