manualshive.com logo in svg

Hyd-Mech S20 SERIES III, Руководство пользователя

Поделиться
Скачать
Hyd-Mech S20 SERIES III Скачать руководство пользователя страница 10

0.6

Responsibilities of the operator and maintenance personnel

Safety equipment

All machines are delivered with safety equipment that must not be removed or bypassed during operation.
The correct functioning of safety equipment on the machine must be checked:

• 

at the start of every shift.

• 

after maintenance and repair work

• 

when starting for the first time, and after prolonged shutdowns

Emergency Stop Button ( E-Stops)

Always be aware of the location of the Emergency Stop Button(s). Do not allow material or objects to 

block your access to an Emergency Stop.

Damage

If any changes capable of impairing safety are observed in the machine or its operation, such as damage, 

malfunctions, or irregularities, then appropriate steps must be taken immediately, the machine switched 

off, locked-out, and the fault reported to the responsible person.

Safe operation

The machine may only be operated when in good working order and when all protective equipment is in 

place and operational.
Keep a safe distance from all moving parts – especially the blade and vises
Stock should not be loaded onto the saw if the blade is running
Long and heavy stock should always be properly supported in front of and behind the saw.

Faults

The machine must be switched off and locked-out before starting to remedy any faults.

Safety hazard labels

Safety hazard labels, and other instructional labels on the machine must be observed. They must be 

clearly visible and legible at all times. If they become damaged they must be replaced. 

Clothing, jewellery, protective equipment

Personnel operating or working on the machine must not wear un-restrained long hair, loose-

fitting clothes and dangling jewellery.
When operating or working on the machine, always wear suitable, officially tested personal pro

-

tective equipment such as safety glasses and safety boots and any other equipment required by 

plant regulations.

Содержание S20 SERIES III



















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды