Hyd-Mech S-20DS, Руководство по эксплуатации и обслуживанию, Страница: 53 / 138

6--3 47 Diagrams, exploded views and replace--
Each component in the wiring diagram is identified by a unique alphanumeric
identification code, in compliance with regulations:
The motor is identified by the code ---M1
The wire is identified by the
code ---W4
These symbols, known as potentials, are used to
provide page references: the first number indi-
cates the page to be referred to, the second
number, after the dot, identifies the column on
that page; example /11.8 indicates that the wire
continues on page no. 11 in column 8
This symbol identifies the wire
with its relative number and co-
lour
The pages following the wiring diagrams contain the following lists:
1. components list (list of all components) and terminals list (list of all the ter-
minals) with the following information:
n
in---house article code;
n
identification code;
n
reference, no. of the page and column on which it can be found;
n
description;
n
manufacturer.
ART. COD. ID PRES. REF DESCRIPTION MANUFACTURER
022.2151 --B1 /5.2 STRAIN GAUGE DELTATEC