Hyd-Mech S-20DS, Руководство по эксплуатации и обслуживанию, Страница: 42 / 138

5--6 36
Use and maintenance manual S--20DS
Preliminary check list for cutting operation
To guarantee complete safety during cutting cycles, the operator should work
through a check list of the entire apparatus, checking:
"
blade tension;
"
that the blade guide head bracket is locked in the correct position;
"
that the cutting angle is correct and the cutting head is locked;
"
that the work piece is properly clamped in place;
"
that the blade teeth are correct for the job to be begun;
"
that the speed selected is right for the kind of piece to be cut;
"
that all protections are in place and correctly locked;
"
the level of lubricant/coolant and that the electropump is activated;
"
That the blade descent speed is correct.
CCS (Cut Control System) functioning cycle
Semi---automatic cutting sequence:
"
power up the machine by turning the main switch;
"
position the workpiece in the vice.
During this programming phase of the cycle, do not position the workpiece per-
pendicular to the blade so that the head may be moved up and down without
colliding with the workpiece.
"
Start the motor turning by moving the blade motor selector to position 1;
"
Completely close the head descent adjuster (0).
Warning