Hyd-Mech PH 211, Руководство по эксплуатации и обслуживанию

Страница: 21 / 98

3--9 15 Safety and accident prevention
Vibration emission
This sawing machine complies with the norms EN1299 and EN1033, as the
machine vibration emission on the devices controlled by the operator does not
exceed the threshold of 2.5 m/s
2
Electromagnetic compatibility
As from 1 January 1996 all electrical and electronic appliances bearing the CE
marking that are sold on the European market must conform to Directive
89/336/EEC and 70/23/CEE and 98/37/CEE. The prescriptions regard two specific
aspects in particular:
1. “EMISSIONS: during its operation, the appliance or system must not emit spurious
electromagnetic signals of such magnitude as to contaminate the surrounding
electromagnetic environment beyond clearly prescribed limits”;
2. “IMMUNITY: the appliance or system must be able to operate correctly even when
it is placed in an electromagnetic environment that is contaminated by disturbances
of defined magnitude”.
The following text contains a list of the applied standards and the results of the
electromagnetic compatibility testing of machine model PH211 ; Test report no.
170201.
Emissions
H
CEI EN 61000--6--4 (2002) Electromagnetic Compatibility (EMC) -- Generic stan-
dard regarding emissions. Part 6--4: Industrial Environment.
H
EN 55011 (1999) Industrial, scientific, and medical radio frequency appliances
(ISM). Characteristics of radio frequency disturbance -- Limits and methods of
measurement.
H
EN 55014--1 (2002) Electromagnetic Compatibility -- Prescriptions for domestic
appliances, electric power tools, and similar equipment. Part 1: Standard Emission
in relation to product family.
CONDUCTED EMISSIONS
Gate A Freq. (MHz) Q---peak limit (dBuV) Mean value limit (dBuV) Result
A.C. power supply
input
0.15 --- 0.5
0.5 --- 5
5 --- 30
79 --- 73
(linear reduction with
log of frequency)
73
73
66 --- 60
(linear reduction with log of fre-
quency)
60
60
Complies
CONDUCTED EMISSIONS --- ANALYSIS OF INTERMITTENT DISTURBANCES
Gate Result
A.C. power supply input Not applicable