Hyd-Mech PH 211 Скачать руководство пользователя страница 13

Страница: 13 / 98

3--1

Safety and accident

prevention

The

PH211

has been designed and produced in accordance with European

standards. For the correct use of the machine we recommend that the instruc-

tions contained in this chapter are carefully followed.

Use of the machine

The

PH211

band saw cutting machine is intended exclusively for cutting metallic

materials, ferrous or non---ferrous, in section or solid.

Other types of material and machining are not compatible with the specific

characteristics of the saw.

The employer is responsible for instructing the personnel who, in turn, are

obliged to inform the operator of any accident risks, safety devices, noise

emission and accident prevention regulations provided for by international

standards and national laws regarding the use of the machine. The operator must

be perfectly aware of the position and function of all the machine’s controls.The

instructions, warnings and accident prevention standards in this manual must be

respected without question by all those concerned.The following definitions are

those provided for by

EEC MACHINES DIRECTIVE 98/37/CE

“Danger zone”: any zone in and/or around a machine in which the presence of a

person constitutes a risk for the safety and health of that person.

“Person exposed”: any person finding himself either completely or partly in a

danger zone.

“Operator”: the person or persons given the responsibility of installing, operating,

adjusting, maintaining, cleaning, repairing or transporting the machine.

The manufacturer declines any responsibility whatsoever, either civil or crimi-

nal, should there be unauthorised interference or replacement of one or more

parts or assemblies on the machine, or if accessories, tools and consumable

materials are used that are different from those recommended by the manu-

facturer itself or if the machine is employed in a plant system and its proper

function is thereby altered.

Attention

Содержание PH 211



































































































Результаты поиска

Содержание PH 211

Отзывы:

Бренды по названию

Популярные бренды

Hyd-Mech PH 211, Руководство по эксплуатации и обслуживанию

Результаты поиска

Содержание PH 211

Отзывы:

Бренды по названию

Популярные бренды