Hyd-Mech P 225, Руководство по эксплуатации и обслуживанию

Страница: 9 / 41

P 225 5
CHAPTER 2
-- Safety
The P 225 has been designed and constructed to comply with Eu-
ropean standards.
It is extremely important that you follow the instructions given in
this chapter, as they are essential for correct use of the
machine.
2.1 -- Intended use of the machine
The pendulum disc sawing machine P 225 is intended to be used
exclusively for cutting metal profiles. The machine’s specific
characteristics make it unsuitable for other types of material
or process.
Personnel training is the responsibility of the employer, who must
inform operators about risks of accident, safety devices, risks
related to noise emission and general safety precautions laid
down by international directives and legislation of the country in
which the machine is used. The operator must be fully aware
of the position and operation of all the machine’s controls.
The instructions, warnings and general safety precautions
described in this manual must be followed completely by the
personnel using the machine.
In accordance with the MACHINERY DIRECTIVE 98/37/CE EEC
and
subsequent supplements and amendments
91/368--93/44--93/68, the following definitions are used:
` ”Danger zone”: any zone within and/or around machinery in
which an exposed person is subject to a risk to his health or
safety.
` ”Exposed person”: any person wholly or partially in a
danger zone.
` ”Operator”: the person or persons given the task of instal-
ling, operating, adjusting, maintaining, cleaning, repairing or
transporting machinery.
WARNING: The manufacturer is released from all civil and
criminal liability if one or more parts or units of the machine
are tampered with and/or replaced without due authorisa-
tion, or if any accessories, tools and expendable materials
are
used other than those recommended by the
manufacturer, or if the machine is inserted in a complex sy-
stem or it is used in any way that is different from the inten-
ded use.
2.2 -- General recommendations
LIGHTING
A lack of adequate lighting for the intended type of operation
could lead to risks for the safety of personnel. For this reason the
user of the machine must ensure that suitable lighting is provided
for the working environment in order to eliminate any areas of
shadow or irritating glare. (Reference standard ISO 8995--89
”Lighting in working environments”).
CONNECTIONS
On the basis of the machine’s power absorption levels given in
the ”Machine specifications” tables on page 2, check that the
electric and pneumatic power supply lines are able to withstand
the machine’s maximum absorption levels and make any neces-
sary changes.
EARTHING SYSTEM
The earthing system must meet precise specifications as prescri-
bed by the IEC STANDARD 204.
OPERATOR POSITION
The operator using the machine must be in the position shown in
the diagram below.
2.3 -- Recommendations for the operator
Always wear adequate safety glasses.
Do not use the machine without the guards in
position.
Do not place your hands or arms in the cutting
zone while the machine is working or the tool is
still turning.
Do not wear loose--fitting clothing, long sleeves,
gloves of the wrong size, bracelets, chains or
anything else that might get caught in the
machine during operation; tie back long hair.
Always disconnect the machine from the
electrical power supply before carrying out any
maintenance work on the machine or changing
the blade. This also applies to operations that lie
outside the normal use of the machine.