Hyd-Mech P 225, Руководство по эксплуатации и обслуживанию

Страница: 8 / 41

P 225 4
CHAPTER 1
-- Functional parts of the machine
In order to gain a good understanding of the machine, which will
be described in detail in the chapter ”MACHINE OPERATION”,
we will look at its main units and their respective positions.
1.1 -- Cutting head
The cutting head is the unit that performs the cut and consists of
a cast iron section on which the following parts are mounted: the
blade, the blade support units, the drive transmission unit and the
spindle motor. The cutting head is fixed to the turntable by means
of a hinge and travels downwards to perform the cut. The
upwards and downward movement of the head is controlled
manually by the operator.
1.2 -- Vice
The vice is the unit that holds the workpiece steady during cutting;
it consists of a vice support on which the slide with the mobile jaw
and the fixed jaw is mounted. The vice support is fixed to the
upper section of the base.
1.3 -- Lubricant/coolant system
The lubricant/coolant system consists of a membrane pump
driven by a cam mechanical system located on the shaft onto
which the blade is flanged.