6 / 10
P
OWERING THE
U
NIT
5.2.
When power is applied, the unit will start up automatically. The LCD will scroll through the boot diagnostics and display the serial numbers, software version and
model types for the amplifier and transducer.
The selected Display Mode will be visible with a measurement.
The top right hand corner diagnostic indicates either the operating mode or the current output.
The
Microflex-D
unit will re-scan for the level whenever it is powered up. The image below shows the elements of the standard display:
I
NTERFACE
5.3.
B
UTTON
A
CTION
N
AVIGATION
/
F
UNCTION
CAL
Press and release
Press and hold for 3 seconds
Access Main Menu
Select / Proceed
Access AutoSet Menu
RUN
Press and release
Cancel / Return
Re-activate unit
↑
↓
Press and Release
Scroll between live diagnostics
Scroll between menu options
Adjust parameters
6.
COMMISSIONING – SOFTWARE
Start up the unit. The
Microflex-D
uses automatic sensitivity control to detect and maintain the level. After applying power to the unit allow 20-30 seconds for the
unit to adjust to the application.
For best results ensure there is a liquid level present in the application, or a flat surface below the transducer.
M
AIN
M
ENU
6.1.
To access the Main menu press
CAL
To access AutoSet menu press
CAL
and hold for 3 seconds
S
ETUP
6.2.
P
ARAMETER
D
ESCRIPTION
O
PTIONS
Display Mode
Set LCD measurement display mode
Level
% Level
Distance
Volume*
Display Unit
Adjust displayed measurement unit
CM
Metres
Feet
Inches
Low-Level
Set Low-Level measurement point
(4mA)
Adjustable
High-Level
Set High-Level measurement point
(20mA)
Adjustable
Damping
Adjust output response time &
smoothness
Adjustable in seconds
Failsafe
Set failsafe output
3.50mA
4mA
3.80mA
20mA
20.20mA
LastKnown
* Volume mode requires PC with Vision System II software. Consult Vision System II Manual
Display Mode
Diagnostic
