safe use of the equipment is provided in a way ensuring the
understanding of potential dangers. Children should not be allowed
to play with the device. Children should not be allowed to perform
cleaning or maintenance of the device unsupervised.
HI HYBRID COMPACT LITE ELECTRIC NAIL DRILL
PACKAGE CONTAINS:
Main body 1x
Handpiece holder 1x
Nail drill cable 1x
Instruction manual 1x
Handpiece with bit chuck 1x
USB C charging cable 1x
DESCRIPTION OF PARTS
1. LED display
2. Speed control knob
3. USB C socket
4. USB socket
5. Belt clip
6. Rotation direction change switch
7. On/Off button
8. Handpiece
9. Power supply cable socket
10. Handpiece holder
INSTRUCTION MANUAL
Please read the manual before use. Before use, make sure the device is turned off. Nail drill battery indicator: full indicator – the
device is fully charged; blinking indicator – the device needs to be charged, the battery is low. The nail drill has a 2000 mAh battery.
The battery can be charged fully in 3.5 h. Fit the selected bit in the handpiece. Mind that it is properly set in its slot. Connect the han-
dpiece to the main body. For the handpiece to operate correctly, make sure you securely connected the plug of the handpiece cable
to the socket in the device. Turning the device on: press the On/Off button and hold for a second. Turning the device off: press the On/
Off button and hold for a second. Changing the rotation direction: the default direction is forward (“F”); you can switch it to reverse
(“R”) by pressing the button when the device is not running (i.e. the rotation speed is 0) To switch back to the other direction, press
the button again when the device is not running. The device will start running once the “0” range on the knob is exceeded; increase
the speed by turning the knob clockwise. Increase the speed by turning the knob towards the “+” symbol, decrease it by turning the
knob towards the “-” symbol. Speed range: 00–30. After you finish working with the device, we recommend storing the handpiece
with a bit or the blank bar inserted – this will protect the bit sleeve from damage.
DRILL BIT INSERTION INSTRUCTION
Turn the chuck’s outer ring left so that the arrow lines up with the open lock symbol (until you hear a click), and insert the Hi hybrid
bit in the handpiece in a way so that the distance between the edge of the handpiece and the lower edge of the bit head is approx.
5–10 mm. This distance depends on the length of the shank of the bit and individual technique and preferences of the operator. After
securing it in the handpiece, the bit should not protrude too far, because this may cause the handpiece to vibrate and make excessive
noise. The bit should not be placed too deep in the handpiece either, as pushing it too far may damage the handpiece mechanism.
If, after you insert the bit in the sleeve, you feel resistance (which indicates that the bit has reached the end of the sleeve), move it
back out several millimetres. After inserting the bit in the sleeve, turn the chuck’s outer ring right so that the arrow lines up with the
closed lock symbol (until you hear a click).
SPECIFICATIONS
Dimensions: 147x60x45 mm
Net weight: 0.56 kg
Rotational speed: max 30000 RPM
Input voltage: 5 VDC 2 A USB / 220 VAC, 50 Hz
Battery voltage: 7,4 VDC 0,5 A
Power: 12 W
6 EN
