6
Please refer to the operation section for more
details.
The power cord cannot be repaired. If the
power cord is damaged, a new one should be
obtained from manufacturer or its service
agent.
any other electrical appliance.
To avoid fire hazard or electric shock:
o
Do not use an extension cord or an
adaptor plug.
o
Do not cut or remove any prong from
the power plug or cord.
Electrical Information
Be sure the power cord is adequate for the
model you have chosen. This information can
be found on the serial plate, which is located
on the side of the cabinet and also behind the
grille.
Be sure the air conditioner is properly
grounded. To minimize shock and fire
hazards, proper grounding is important. The
power cord is equipped with a three-prong
grounding plug for protection against shock
hazards.
Your air conditioner must be used in a
properly grounded wall receptacle. If the wall
receptacle you intend to use is not
adequately grounded or protected by a time-
delay fuse or circuit breaker, have a qualified
electrician to properly install it.
Ensure the receptacle is accessible after the
unit installation.
Do not run air conditioner without a side
protective cover.
This could result in mechanical damage within
the air conditioner.
The appliance shall be installed in accordance
with national wiring regulations.
Do not use an extension cord or an adapter
plug.
NOTE:
The shape may be different according to its model:
Do not under any
circumstances, cut, remove
or bypass the grounding
prong
Power supply cord with 3-prong grounding plug
and current protection device
