11
Note:
Performance may be reduced outside of these operating temperatures.
Accessory
NOTE: When the unit displays LC
(Pads on the control panel is not available. The unit can be set by using
wire controller only.) You can install the Accessory on the control panel.
DIP SWITCHES CONFIGURATIONS (Optional)
REMOVING THE FRONT PANEL
- Dip switches controls are located behind front
panel, through an opening below the control
panel. To access, remove front panel. See Fig.2.
- Dip switches are accessible without opening the
control box. See Fig.3.
- Unit must be powered OFF to effectively change
their status.
DIP SWITCHES CONFIGURATIONS
- See Table 1 and Fig.4 for Dip Switches configurations and functions of each dip switch position.
