Hybertone GoIP Series Скачать руководство пользователя страница 19

Страница: 19 / 73

http://www.hybertone.com GSM Series Voice Gateway

provide the automatic setting, you need to select

“

Disable

”

to speed up the startup time of the GoIP.

It is a special server, which needs the support of the specific system.

3.3.5 Setting of the Remote Control

Press *20# on the terminal to initiate the request to realize the remote management of equipment.

The remote control server is provided by the service provider. The default port is 1920 and the

terminal is identified by the SN. The remote control password is identical with that of the server

and is set as default.

In the following figure, the remote control server is set as 118.142.51.162. The terminal user

presses *20# and a long tone is heard, which indicates that the instruction has been successfully

sent. The remote administrator access

http://118.142.51.162:8086

and the model and SN of the

gateway are displayed. Click the gateway SN to set the remote gateway.

Note: It is a special server, which needs the support of the specific system. For details, please contact the technical

support of HYBERTONE Technology.

3.3.6 GSM Group Mode

Users can establish a GSM group containing multiple GoIP gateways. Under this mode, the

administrator only needs to provide a GSM number to the user to call in the VoIP system.

Содержание GoIP Series










































































Результаты поиска

Содержание GoIP Series

Отзывы:

Похожие инструкции для GoIP Series

Бренды по названию

Популярные бренды

Hybertone GoIP Series, Руководство пользователя

Результаты поиска

Содержание GoIP Series

Отзывы:

Похожие инструкции для GoIP Series

Бренды по названию

Популярные бренды