http://www.hybertone.com GSM Series Voice Gateway
17
Click
“
English
”
on the upper right corner of the setting page. Then, the setting page will display all
info in English. But the shortcut will not change the language of the setting page when logged in
next time.
3.3.2 Time Zone and Time Server
This item displays the adjusted time according to the selected time zone. The gateway receive time
and date information from the server through the Network Time Protocol and the time difference
will be automatically adjusted. For example, the pacific standard time (PST) is GMT-8 and the
pacific daylight time (PDT) is GMT-7.
The time zone indicates the zone where the gateway is used. You need to enter the correct time
zone, so that the time of the caller ID and charging information can be displayed correctly. The
time server is the address of the server that obtains the network time through the Internet. The
default time server is timekeeper.isi.edu.
3.3.3 DTMF Minimum Detection Interval
This parameter is used to set the minimum interval of two DTMF signals. Packets may be lost
during the data transmission over the GSM. As a result, a DTMF may be incorrectly identified as
two or multiple identical DTMFs when detected by the GoIP. The problem of repeated code can be
solved effectively through the modification of the parameter.
This parameter value ranges from 60ms to 120ms and the default value is 80ms. When the value of
this parameter is increased properly, the repeated DTMF can be avoided efficiently. However, the
packet loss may also be caused.
3.3.4 Automatic Setting
If the service provider provides the automatic setting, you can select
“
Enable
”
to start the
automatic setting feature and enter the address of the server. If the service provider does not
