Hybertone GoIP Series Скачать руководство пользователя страница 68

Страница: 68 / 73

http://www.hybertone.com GSM Series Voice Gateway

Note: Some of parameters of the gateway will not be valid until the gateway is restarted. Therefore, you are advised

to restart the gateway after the parameters are modified, so that the modification can take effect.

3.12 Abandon the change

When the new setting is not saved, you can clear all the unsaved parameters.

3.13 Tool

Select Menu > Tool. The following page is displayed.

3.13.1 Online Upgrading

Warning! Only experienced users and administrators can implement the online upgrading.

Select Tool > Online Upgrading. The online upgrading page is displayed, as shown in the

following figure. Enter the complete name and path of the upgrade package, such as

http://118.142.51.162/update/GHS-4.01-12.pkg , and then click

“

Start

”

The gateway begins to

upgrade. After the GoIP is successfully upgraded, the gateway will automatically restart.

Содержание GoIP Series










































































Результаты поиска

Содержание GoIP Series

Отзывы:

Бренды по названию

Популярные бренды

Hybertone GoIP Series, Руководство пользователя

Результаты поиска

Содержание GoIP Series

Отзывы:

Бренды по названию

Популярные бренды