http://www.hybertone.com
SIP Phone EP-8201
Configuring the VoIP Phone
•
Logging into the VoIP Phone
•
Selecting
Configurations
and then
Call Settings
to display the page below.
Figure 2
Call Settings Screen
–
SIP (Single Server Mode)
•
Two registration modes are supported:
Ø
Single Server Mode
–
This mode allows SIP registrations to only one SIP Server /
Proxy; however, it can support up to 4 registrations with different SIP numbers and
names (Contact). A backup server option is available and it will be used once
registration to the primary server fails. Line 1 to Line 4 keys are predefined for the
“
Contact1
”
,
“
Contact2
”
,
“
Contact3
”
, and
“
Contact4
”
in sequence. This allows the
user to specify which identity (Contact: SIP number and name) will be used for the
call. The default is to use the contact information for Line1 (Contact1).
Ø
Multiple Server Mode
–
This mode allows up to 4 SIP registrations to different SIP
servers / proxies as shown below. The Profile 1 is always used as the default SIP
server when a call is made without specifying the designated SIP server. Line 1 to
Line 4 keys are predefined for line selection. If a Profile is not programmed, the
corresponding line selection key is disabled.
