http://www.hybertone.com
SIP Phone EP-8201
1
Installation and Basic
Configuration
Hardware Installation
1.
Connect the handset and telephone cord to the base of the VoIP Phone.
2.
Use the enclosed Ethernet cable to connect the LAN port to a hub or switch, or to a
DSL Router or Cable Modem.
3.
Connect the power supply using the enclosed AC power supply.
4.
For the first time installation, the phone will scan the network for available services
which are DHCP, PPPoE, and Fixed IP. Select the preferred service and enter the
required information if needed. No user input is required for DHCP service. User ID
and Password are required for PPPoE. IP address, Netmask, and Gateway IP Address
are required for Fixed IP mode.
Accessing the Web Configuration Menu
The steps for accessing the VoIP Phone Web Configuration Menu are:
Ø
Obtain the VoIP Phone IP address.
Ø
Enter the IP address into a browser.
Ø
Log in to the VoIP Phone.
Obtaining the VoIP Phone IP Address
To retrieve the IP address from the VoIP Phone:
Ø
When the phone is in the on-hook state, press
Menu
.
Ø
Press
3
(System Tools).
Ø
Press
1
(Phone Status).
