Hy-Brid Lifts HB-P527, Инструкция по эксплуатации и безопасности

Страница: 3 / 24

Original instructions written in English.
The purpose of this Operations and Safety manual is to provide users with the instructions and operating procedures
essential to properly and safely operate the Custom Equipment Hy-Brid Lift for its intended purpose, and to position
personnel and their necessary tools and materials.
THE OPERATION AND SAFETY MANUAL MUST BE READ AND
UNDERSTOOD PRIOR TO OPERATING THE MACHINE.
• The user/operator should not accept operating responsibility until the manual has been read and understood as
well as having operated the lift under supervision of an experienced and qualified operator.
• Because the manufacturer has no direct control over machine application and operation, proper safety
practices are the responsibility of the user and all operating personnel.
ANY MODIFICATION ON THIS MACHINE WITHOUT THE EXPRESS
WRITTEN CONSENT OF THE MANUFACTURER IS PROHIBITED.
Fall protection notice:
The guardrail system around the perimeter of the platform is the fall protection system for push-around elevating
work platforms per the ANSI/SIA A92.3 Standard. It is prohibited to use an Aerial Work Platform manufactured
by Custom Equipment, LLC. With any portion—or all—of the guardrails removed. Lanyard anchorage points on
this type of equipment are not required to conform to the applicable standard. However, if anchorage points for
lanyard attachments are required by site authorities or other regulations, the anchorage points on all equipment
manufactured by Custom Equipment, LLC. Are recommended to be used for work positioning restraints of
personnel only. Lanyard lengths are to be determined by operator/owner to restrict the operator to the confines
within the guardrail system.
USE OF FALL ARREST SYSTEMS ATTACHED TO ANCHORAGE POINTS ON
EQUIPMENT MAY CAUSE MACHINE TO TIP, RESULTING IN SERIOUS INJURY OR DEATH.
FOREWORD
DANGER
WARNING
WARNING
OPERATIONS & SAFETY
HB-P527 SUPO-723
REV C
BY CUSTOM EQUIPMENT LLC
3