Hy-Brid Lifts HB-P527, Инструкция по эксплуатации и безопасности

Страница: 6 / 24

SECTION 1 | SAFETY
1.1 | SAFETY SYMBOLS
Warnings and instructions that have a direct impact on safety are identified with the following signals:
FAILURE TO FOLLOW THIS WARNING WILL CAUSE
DEATH OR PERSONAL INJURY.
“DANGER” indicates an imminently hazardous situation,
which, if not avoided, will result in death or serious
injury.
FAILURE TO FOLLOW THIS WARNING MAY CAUSE
DEATH OR PERSONAL INJURY.
“WARNING” indicates a potentially hazardous situation,
which, if not avoided, could result in death or serious
injury.
FAILURE TO FOLLOW THIS WARNING MAY CAUSE
INJURY OR DAMAGE TO EQUIPMENT
“CAUTION” indicates a potentially hazardous situation
which, if not avoided, could result in minor or moderate
injury or damage to equipment.
1.2 | GENERAL RULES AND PRECAUTIONS
Custom Equipment, LLC designed the Hy-Brid Lift push-around scissor lift to be safe and reliable. It is intended for
elevating personnel, along with their necessary tools and materials to overhead work locations. Vibration does not
create significant hazards on this machine.
An operator of any type of work platform is subject to certain hazards that cannot be protected by mechanical
means. It is therefore essential that operators be competent, careful, physically and mentally fit, and thoroughly
trained in safe operation of this machine. Although Custom Equipment, LLC conforms to specified ANSI & OSHA
requirements, it is the responsibility of the owner to instruct operators with the safety requirements made not only
by Custom Equipment, LLC, but by the various safety boards in your area, as well as additional requirements set
forth by ANSI & OSHA If you come across a situation that you think might be unsafe, stop the platform and request
further information from qualified sources before proceeding.
NEVER REACH BETWEEN SCISSOR LINKS OR PROP UP PLATFORM
DANGER
CAUTION
WARNING
WARNING
OPERATIONS & SAFETY
HB-P527 SUPO-723
REV C
BY CUSTOM EQUIPMENT LLC
6