HX TDT001Z, Руководство пользователя

Страница: 11 / 13

-
17
- -
18
-
Open the dust cover on the battery, insert the DC plug of the charger into the charging base of the
battery, and then plug the AC plug of the charger into the AC power (100-240V; 50/60Hz) socket,
the indicator is red and charging starts
6.3 Charging steps
Reminder:
Battery Instruction
Name
6.1 Battery Parameters
The instruction shows how to charge and maintain the battery, some safety notices and
the specification. Please use the battery properly according to this instruction to prolong the
battery life and its performance
Type
Temperature
Parameter Name Name
Battery Capacity Rated Voltage
Charging time
Parameter Parameter
36V
5-6h
6.2 Battery Safety
In order for the electric bicycle to work stably and efficiently, the battery must be charged and
used within the temperature range required by the battery specification;
Before installing and using the battery, please unplug the charger. It is dangerous to do
anything related to the electric bicycle during the charging process;
It is forbidden to disassemble or pierce the battery pack shell to avoid short circuit caused by
metal objects contacting the battery contacts, otherwise it may cause battery damage or
personal injury.
It is forbidden to throw the battery into water, fire (including near stove, heater, etc.) or expose
it to high temperature (50°C), otherwise it may cause battery failure, overheating, or even risk
of fire.
Water in the battery may cause damage to the internal circuit and risk of fire or explosion. If
the battery is suspected of being exposed to water, please stop using the battery immediately
and send it to after-sales testing.
Only use the original charger to charge, otherwise there is a danger of damage to the battery
or fire.
If the battery is damaged, emits peculiar smell, smoke or overheating, please do not continue
to use the battery, and avoid other objects in contact with the battery.
Please fully charge the battery before storing after each use, which will help extend the battery
life.
Do not place the battery in a high temperature higher than 50°C or a low temperature
environment lower than -20°C.
When not in use for more than 30 days, please fully charge it first, store it in a cool and dry
place, and fully charge it at least once every 90 days, otherwise the battery may be damaged
and this damage is not covered by the warranty.
Avoid recharging when the battery is completely exhausted, and try to charge as soon as
possible, which can greatly extend the battery life. In addition, when used at room
temperature, the battery pack can exert a higher range and performance; and if used in an
environment below 0°C, the battery life and performance will decrease. Typically, in an
environment of -10°C, the cruising range may be only half or lower than that at room
When charging, you can only use the original
standard power adapter. Do not use any other
to avoid danger caused by power mismatch.
Charging port
Battery lock
Charging method A: Charging method B:
Max Charging
Voltage
Li-ion battery
42V
-10-40
°C
Max Charging
Current
Charging
Temperature
Store Time
(-10-40°C)
3 months
(full charge)
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12. Improper disposal of used batteries may seriously pollute the environment. Please abide by
local regulations when disposing of this battery pack.
1. When the internal temperature of the battery exceeds 50°C, the battery is in a protected state
and cannot be charged!
A fully charged electric bicycle will be no battery after about 90-120 days of standby.
If it is not charged in time, it may cause damage to the battery due to excessive discharge. This
damage is irreversible and out of free warranty.
2.
10Ah
2A
0-40
°C