HX TDT001Z, Руководство пользователя

Страница: 5 / 13

-
05
- -
06
-
2
1 2 3
1.Lift the pole and the front of scooter, Fasten the folding buckle of pole.
2.Turn the fix ring of the folding buckle to fasten the spanner, prevent opening of folding buckle.
3.Align the handle bar of the scooter with the upper end of the pole, and lock the front with the
four screws provided.
1
3
Loose
Horn button: short press the button, the horn will "beep, beep".
Front and rear brakes: hold the brakes, the car will slow down and stop.
①
②
③
④
⑤
⑥
⑦
⑧
Function Description
Low speed mode: without D
Normal model: white D
High-speed mode: Red D
Note: When the brake is active, turning the throttle knob to accelerate is invalid!
Bluetooth
Battery power
Temperature alarm
Gear
Speed
Speed unit
Display content illustration
Product assembly
Display: battery power,speed,gear ect;
Key lock:Insert the key, turn clockwise to the ON position to turn on, and turn
counterclockwise to the OFF position to turn off;
Throttle:Move the throttle to ride in pure electric mode;
Headlight switch: push the switch to the ON position to turn on the front light,
push it to the OFF position to turn off the front light;
Photosensitive switch: When the ambient light becomes dark, the front and rear
lights will automatically turn on when the headlight switch is not turned on;
Gear shift switch: Toggle the switch to switch 1, 2, and 3 gears in sequence from
1. Open and fix the handle bar of the e-bike
Note: Shake the handlebar after installation, if it
becomes loose, pls adjust the screw as shown in the
figure. The screw cannot be adjusted too tightly. If it is
too tight, it will be difficult or impossible to open the
folding buckle wrench.
Tight