background image

ZX7-315/400/500/630IGBT OPERATOR’S MANUAL

- 5 -

1. Main usage and application range

1.1 Main usage

ZX7–IGBT Series welding machine can be used for different types of electrode, especially suitable for
hydrogen electrode to weld low carbon steel, mid-carbon steel and their alloy workpiece. It is mainly used
in the industries like ship-building, boiler, power tower, petroleum and construction industries.
ZX7-630IGBT is also suitable for air carbon arc gouging.
ZX7-IGBT series is one of our newest energy-saving power source, which with excellent technical standard
and welding craft. Its advantages as:
●Good dynamic characteristic, stable arc, good performance, little spatter
●Wide distribution voltage: 380VAC±60VAC
● Arc force adjust function
●Hot current adjust function
●Welding current preset function
● Easy to operate, with remote control connector
● Lack voltage, over heat protection function
● Input voltage fluctuation compensation function, keep stable output current
● High efficiency, Low non-load loss
●Small volume, light weight, easy to move

1.2 Model specification

This welding machine designed and produced according to the GB15579.1-2004

JB/T7824-1995.

Model: Z X 7 — ×××IGBT

Insulated bipolar transistor
Rated welding current
Invert
Slope-control
Rectified arc welding machine

Note: if there is a "Q

in the rear of the model name, this indicate the fibrin welding machine, the operation

method the same as the ZX7-IGBT machines, which specially suitable for fibrin electrode.

2. Working Environment

1. Environmental area

1.1 Operating altitudes: less than 1000m
1.2 Temperature ranges:
Operating temperature range: -10

~+40

Storage temperature range: -25

~+55

1.3 Relative humidity: 50% for temperature up to 40

90%@20

1.4 Do not locate where there is harmful gases, chemical depositions, mycete, and other explosive or
corrosive substances, prevent shaking and jolt.
1.5 Keep the machine inside and dry all the times, do not place it in a confined space, do not locate where
the machine is exposed to direct sunlight.

Содержание ZX7-315IGBT













Отзывы: