17
Table 6 -- Orifice Size and Manifold Pressure (In. W.C.) for Gas Input Rate (cont.)
A10185A
REINSTALL BURNER ASSEMBLY
To reinstall burner assembly:
1. Attach flame sensor to burner assembly.
2. Install HSI and bracket to burner assembly.
3. Insert one-piece burner in slot on sides of burner box and
slide burner back in place.
4. Reattach HSI wires to HSI.
5. Verify igniter to burner alignment.
6. For Silicon Nitride igniters, see Fig. 21 and 22.
7. For Silicon Carbide igniters, see Fig. 23.
8. Reattach Flame sensor wire to Flame Sensor.
9/32”
7.1mm
5/16”
7.9mm
A05025
Fig. 21 -- Igniter Position -- Side View
Содержание KGAPN43012SP
Страница 10: ...10 A11514 Fig 13 Conversion Responsibility Label A11515 Fig 14 Conversion Kit Rating Plate Label ...
Страница 14: ...14 Table 5 Orifice Size and Manifold Pressure In W C for Gas Input Rate A10184 ...
Страница 15: ...15 Table 5 Orifice Size and Manifold Pressure In W C for Gas Input Rate cont A10184A ...
Страница 16: ...16 Table 6 Orifice Size and Manifold Pressure In W C for Gas Input Rate A10185 ...
