Huyndai HYU-403, Руководство пользователя

Страница: 12 / 132

Page.7.
31 HDMI output interface
32 Micro SD card moveable,(comes with 8GB, supports up to 32GB)
33 UTP cable port: UTP cable tester port/ Cable tracer port
34 PSE power sourcing equipment. Tests PoE voltage
35 PoE power supply output or LAN test port (Use to test PoE or non-PoE IP camera)
36 Audio output and earphone interface
37 Audio input
38 USB 5V 2A power output (used only for power, not data)
39 DC12V2A charging interface
40 DC12V2A power output , for provisional DC power supply
3. Operation
3.1 Installing the Battery
The tester has built-in lithium ion polymer rechargeable battery. The battery cable inside battery
cabin should be disconnected for safety during transportation!
Prior to the use of the instrument, the battery cables inside the battery cabin should be well
connected.
Usually it doesn’t need to disconnect the cable at the normal use
Pressing the key continuously can power on or off the tester.
Notice:Pls use the original adaptor and connected cable of the device!
When the battery icon is full or the charge indicator turns off automatically, indicate the battery
charging is completed.
Notice: When the Charge Indicator turns off, the battery is approximately 90% charged.
The charging time can be extended for about 1 hour and the charging time within 12 hours will not
damage the battery.