Huyndai HYU-403 Скачать руководство пользователя страница 124

Страница: 124 / 132

Page.119.

Don’t input any power into the “DC12/2A OUTPUT” port of the tester.

Man-made damage is not within our company’s warranty.

The IP tester ’s power output capacity is 2A. If the IP camera uses more than 2A, the tester will

automatically enter a protection mode.

Disconnect all cables from the tester and reboot it to resume using the tester.

The IPC tester power output is close to 2A, if the IP camera’s power is over 2V, the tester will

auto enter protection mode. Disconnect all the connections of the tester and then connect the

tester with power adaptor to resume the tester.

Make sure the tester has a sufficient charge otherwise the tester will not able to provide enough

output power.

3.8

USB 5V 2A power output

When the tester is turned on, the DC 12V and DC 5V power output functions are automatically turned

on. If the IP tester is turned off, the DC 5VUSB can still be used to power an external USB device.

NOTE: The USB port is for power only and not data.

Notice:

Содержание HYU-403





































































































































Результаты поиска

Содержание HYU-403

Отзывы:

Похожие инструкции для HYU-403

Бренды по названию

Популярные бренды

Huyndai HYU-403, Руководство пользователя

Результаты поиска

Содержание HYU-403

Отзывы:

Похожие инструкции для HYU-403

Бренды по названию

Популярные бренды