Huvitz HDR-9000, Руководство по обслуживанию

Страница: 13 / 66

- 12 -
3.2.4 Checking Procedures for Data Communication
①
Checking with Ref/Keratometer.
- Check the Option menu of MRK or HRK for the communication.
Set the BPS option to 9600.
- Measure a model eye or a patient.
- Press PRINT button for transferring the measured data.
- Press RK button with SHIFT pressed on the Operation Panel after the MRK or HRK
finishes printing.
- Select and load the data received.
- Check if the data is correct.
②
Checking with Lensmeter.
- Check the Option menu of CLM or HLM for the communication.
Set the RS232 option.
Set the BPS option to 9600.
- Measure a lens.
- Press PRINT button for transferring the measured data.
- Press LM button with SHIFT pressed on the Operation Panel after the CLM or HLM
finishes printing.
- Select and load the data received.
- Check if the data is correct.
③
Checking with CCP-3100
- Check the System Settings menu of the Operation Panel for CCP-3100.
Set the Chart Connection option to SERIAL (it doesn't support IR option).
Set the Chart Device option to CCP-3100.
- Store the change by pressing the button OK or “HOME” button on the display.
- Press some chart buttons and check the response of CCP-3100.
④
Checking with CDC-4000
- Check the System Settings menu of the Operation Panel for CDC-4000.
Set the Chart Connection option to SERIAL (it doesn't support IR option).
Set the Chart Device option to CDC-4000.
- Store the change by pressing the button OK or “HOME” button on the display.
- Press some chart buttons and check the response of CDC-4000.