HUSTLER TrimStar 927632 Скачать руководство пользователя страница 9

102780  6/05

2-1

This safety alert symbol is used to call attention to a

message intended to provide a reasonable degree of

PERSONAL SAFETY

for operators and other persons

during the normal operation and servicing of this equipment.

DANGER –

denotes immediate hazards which 

WILL

result in severe personal injury or death.

WARNING -

denotes a hazard or unsafe practice which

COULD

result in severe personal injury or death.

All operators should read this manual, or be instructed

about safe operating and maintenance procedures.  This is
the owner’s responsibility.

Incorrect usage of this machine may result in

severe injury.  Personnel operating and maintain-
ing it should be trained in the proper use and
should read the manuals completely and
thoroughly before attempting to set-up, operate,
adjust, or service this machine.

The Quick Reference Decal located on the unit is

designed to give the operator brief information needed in the
daily operation of the machine.  These decals are not
intended to be used in place of this manual but instead are to
be used as an extension of this manual.  These decals should
not be remove or obliterated.  Replace these decals if they
become unreadable.   

It is the 

owner’s responsibility 

to make certain that the

operator reads and understands this manual and the Quick
Reference Decal before operating this machine.  It is also
the 

owner’s responsibility

to make certain that the operator

is a qualified and physically able individual, properly
trained in the operation of this equipment.  Local regulations
may restrict the age of the operator. 

The owner should also ensure that the operator/mechanic

know that they are responsible for their own safety as well
as the safety of other persons within the vicinity.

Remember, 

the operator is responsible for accidents or

hazards occurring to other people or their property.

Place transmission handle in the neutral position,
disengage blade engage lever, place thumb lock levers
in the park brake position, and remove ignition switch
key when leaving the unit.

Always keep safety shields and covers in place, except
for servicing.

Always maintain a safe distance from people and pets
when mowing. Always stop machine if someone
enters the area.

Keep children out of the mowing area and under the

watchful care of another responsible adult.

Be alert and turn the machine off if children enter the
area.

Always operate machine in daylight or with adequate
working lights. 

Follow daily and weekly checklists, making sure hoses
are tightly secured and bolts are tightened.

Always observe traffic laws while driving machine
from one location to another. Watch for traffic when
operating near or crossing roadways.

Always keep engine and machine clean, removing
accumulated dirt, trash and other material from
machine.  Clean up oil or fuel spillage.  Allow
machine to cool before storing.

Inspect area to be mowed for hazards such as rocks,
metal objects and other debris which may be thrown or
entangled by mower blades.  Remove these objects
before mowing.

Always be alert for hazards such as rocks, metal
objects and other debris which may be thrown or
entangled by mower blades.  Watch out for holes or
deep depressions.

Always wear adequate eye protection when grinding
mower blades and removing accumulated debris. 

Always use adequate ear protection, such as earplugs,
when operating this equipment as prolonged exposure
to uncomfortable or loud noises can cause impairment
or loss of hearing.  Do not wear radios or music
headphones while operating the machinery.  Safe
operation requires your full attention.

Always be aware of what is behind the machine before
backing up.

Always inspect machine for damage after striking a
foreign object. If damage is found, repair machine
immediately.  Be sure to place transmission handle in
the neutral position, disengage blade engage lever,
place thumb lock levers in the park brake position, and
remove ignition switch key before inspecting for
damage.

Never operate a poorly maintained machine.

Never carry passengers.

Never attempt high speed maneuvering, especially in
crowded or congested areas.

Never allow persons to operate this machine without
proper instruction or allow children to operate
machine. Allow only responsible adults who are
familiar with these instructions to operate this
machine.

Never put hands or feet under any part of the machine
while it is running.

Never leave machine unattended with ignition key in
switch, especially with children present.

Never refuel unit while engine is running; never refuel
near an open flame or near devices which can create a
spark.  Refuel outdoors preferably, or in well
ventilated areas.

SAFETY PRECAUTIONS

Содержание TrimStar 927632


































Отзывы: