HUSTLER TrimStar 927632, Руководство пользователя, Страница: 5 / 33

102780 6/05 1-1
This manual applies to the following equipment:
TrimStar - TSG13KAW32A, 927632
TrimStar - TSG15KAW36A, 927640
TrimStar - TSG17KAW48A, 927657
To the new owner
The purpose of this manual is to assist owners and
operators in maintaining and operating the TrimStar Gear
Driven. Please read it carefully; information and
instructions furnished can help you achieve years of
dependable performance.
A separate Engine Manual is included with your owner’s
packet which contains additional engine information that
will not be repeated in this manual. You are urged to read it
before attempting any operation or repair of the engine.
The Quick Reference Decal located on the unit is
designed to give the operator brief information needed in the
daily operation of the machine. These decals are not
intended to be used in place of this manual but instead are to
be used as an extension of this manual. These decals should
not be remove or obliterated. Replace these decals if they
become unreadable.
It is the owner’s responsibility to make certain that the
operator reads and understands this manual and the Quick
Reference Decal before operating this machine. It is also
the
owner’s responsibility to make certain that the operator
is a qualified and physically able individual, properly
trained in the operation of this equipment.
Using this manual
General operation, adjustment and maintenance guidance
is outlined for both the experienced and novice Hustler user.
Operating conditions vary considerably and cannot all be
addressed individually. Through experience, however,
operators should find no difficulty in developing good
operating skills suitable to most conditions.
Directions used in this manual, for example RIGHT or
LEFT, refer to directions when facing forward while
operating the unit, unless otherwise stated.
Photographs and illustrations used were current at the
time of printing, but subsequent production changes may
cause your machine to vary slightly in detail. Hustler Turf
Equipment reserves the right to redesign and change the
machine as deemed necessary, without notification. If a
change has been made to your machine which is not
reflected in this owner’s manual, or the parts manual, see
your Hustler dealer for current information and parts.
Warranty registration
The Delivery and Warranty Registration form must be
completed and signed to validate your warranty protection.
As the new equipment owner, you are expected to see that
the form is completed and forwarded to Hustler Turf
Equipment at time of delivery.
Be sure to register the unit with Hustler Turf Equipment.
IMPORTANT: Any unauthorized modification,
alteration, or use of non-approved attachments voids the
warranty and releases Hustler Turf Equipment from any
liability arising from subsequent use of this equipment.
Model and serial number
Unit model and serial numbers are found on the serial
identification plate, located on the left side of the frame next
to the fuel tank.
These numbers are required on the Warranty Registration
form. They will also assure you of the correct service parts
when replacement becomes necessary.
Parts and service
Use original Hustler replacement parts only. These parts
are available through your local Hustler dealer. To obtain
prompt, efficient service, always provide the following
information when ordering parts:
1. Correct part description and number, as given in the
parts manual supplied with your owner’s packet.
2. Correct model number.
3. Correct serial number.
All warranty repair and service must be handled through
an authorized Hustler dealer. Arrangements should be made
through your local service center.
For location of nearest dealer, or should you need further
assistance, contact:
Customer Service Department
Hustler Turf Equipment
P.O. Box 7000
Hesston, KS 67062
Telephone (316) 327-4911
FAX (316) 327-2458
www.hustlerturfequipment.com
GENERAL INFORMATION