manualshive.com logo in svg

HUSTLER 931279CE, Руководство оператора, Страница: 27 / 56

Поделиться
Скачать
HUSTLER 931279CE Скачать руководство пользователя страница 27

603695CE

3-7

REV G

CZ

DA

DE

EN

ES

FR

IT

NL

PT

SV

For emergency stops,

 when traveling forward or rearward, 

place the steering control levers in the park brake position 
immediately.  

To make a three point turn to the right:

 

1.

Move the left steering control lever farther forward 
from neutral than the right steering control lever and 
start the turn. Figure 3-12

2.

Next, pull back on the steering control levers until they 
pass neutral and the machine starts to go rearward. 
Figure 3-12

3.

Pull the right steering control lever farther rearward 
from neutral than the left steering control lever until 
the rear of the machine pivots around. Figure 3-12

4.

Then, push the steering control levers forward until 
they both pass neutral and the machine starts to go 
forward. Figure 3-12

5.

Push the left steering control lever farther forward 
from neutral than the right steering control lever and 
finish the turn. Figure 3-12

IMPORTANT:  

Damage to the hydraulic system compo-

nents may occur with rapid movement of the steering con-
trols.

To increase speed,

 increase the steering control lever’s dis-

tance from neutral. The farther forward the steering control 
levers are from neutral, the faster the mower will travel for-
ward. The farther back the steering control levers are from

 

neutral, the faster the mower will go in reverse. 

When moving in the rearward direction push for-
ward gently on steering control levers and avoid 
sudden movement. Any sudden movement could 
cause the front of the mower to come off of the 
ground resulting in possible loss of control, caus-
ing serious injury or death.

Always be aware of what is behind the machine 
before backing up. Do not mow in reverse unless 
absolutely necessary. Always look down and 
behind before and while backing up.

DA

N

G

ER

WA

R

N

IN

G

Figure 3-11

FORWARD TRAVEL

FRONT OF MOWER FACES THIS DIRECTION

ZERO RADIUS TURN

FORWARD TRAVEL 

RIGHT TURN

REVERSE TRAVEL 

RIGHT TURN

REVERSE TRAVEL

N = NEUTRAL POSITION

Direction of arrows indicate direction of mower 

movement

N

N

N

N

N

N

N

N

N

N

Содержание 931279CE

























































Отзывы:

Нет отзывов