manualshive.com logo in svg

HUSTLER 931279CE, Руководство оператора, Страница: 15 / 56

Поделиться
Скачать
HUSTLER 931279CE Скачать руководство пользователя страница 15

603695CE

2-9

REV G

CZ

DA

DE

EN

ES

FR

IT

NL

PT

SV

  

WARNING:

Roll over!

•

Operate a safe distance (minimum of 10 feet) away from drop-offs, 
retaining walls, drainage ditches, embankments, water, and other 

types of hazards to avoid a wheel dropping over the edge or to avoid 

the ground from breaking away.

WARNING:

Back over!

•

Always be aware of what is behind the machine before backing up. 
Do not mow in reverse unless absolutely necessary. Always look 

down and behind before and while backing up.

•

Do not carry passengers. 

•

Always stop machine if someone enters the area. 

WARNING:

Roll over!

•

Slow down before turning.

•

Do not operate on slopes greater than 15 degrees. 

•

Keep all movement on slopes slow and gradual. Never make sudden 
changes in speed and direction.

•

Do not operate on slopes above a retaining wall or drop-off.

WARNING:

Ejection!

•

Do not operate on slopes greater than 15 degrees. 

•

Keep all movement slow and gradual when going up or down slopes.

•

Do not remove or modify stabilizer wheels or injury can result.

WARNING:

Loss of traction/control on slopes!

•

Shut off blades.

•

Back slowly down the slope when loss of traction occurs.

Part Number 601993

WARNING:

Read operator’s Manual and decals before attempting to 

operate this machine.

 

 

Содержание 931279CE

























































Отзывы:

Нет отзывов