manualshive.com logo in svg

HUSTLER 931279CE, Руководство оператора, Страница: 26 / 56

Поделиться
Скачать
HUSTLER 931279CE Скачать руководство пользователя страница 26

REV G

3-6

603695CE

CZ

DA

DE

EN

ES

FR

IT

NL

PT

SV

Following an accident, check the ROPS, the operator’s seat, 

the seat belt, seat belt mountings and seat platform for pos-
sible damage. Before operating the machine, replace all dam-
aged parts. 

IMPORTANT:  

Do not attempt to weld or straighten the 

ROPS.   

ROPS Inspection

 Inspect the ROPS after the first 20 hours of operation. 

Following the initial inspection, check the ROPS after every 
500 hours of operation or every six months, whichever 

comes first. 

1.

Check the torque of the ROPS mounting bolts 
(Figure 3-10). Tighten the bolts to the correct torques 
as shown below if necessary. 

2.

Inspect the operator’s seat and the mounting parts for 
the seat belt. Tighten the bolts to the correct torque as 
shown below if necessary and replace parts that show

 

wear or damage.

3.

Check the seat platform to make sure it is secured 
properly. Adjust or repair it as necessary.

Torque values:

N•m

ROPS mounting hardware................. 99
Seat belt mounting hardware............ 65 

A

B

Mower Operation

This mower features the SmoothTrak™ steering system. 

The following provides you with detailed information on how

 

to operate the mower efficiently.

Driving the Mower

 

After starting the engine, engage the steering control 

levers and steer as follows:

To go forward,

 push the steering control levers forward an 

equal distance. Figure 3-11

To go in reverse,

 pull the steering control levers rearward 

an equal distance. Figure 3-11

To turn left,

 move the right steering control lever farther 

forward from neutral than the left steering control lever.

To turn right,

 move the left steering control lever farther 

forward from neutral than the right steering control lever. 
Figure 3-11

Zero radius turn,

 move one steering control lever forward 

and the other steering control lever back of neutral. This 
allows the drive wheels to counter-rotate. Figure 3-11

To stop or decrease speed,

 move steering control levers to 

neutral. When going forward pull back gently on steering con-
trol levers. When going in reverse push forward gently on 
steering control levers.

The ROPS structure’s protective capability may be 
impaired by structural damage, overturn or alter-
ation.

  Do  not  remove  or  alter  any  of  the  ROPS 

parts. Do not attempt to weld or straighten ROPS. 
Failure to adhere to these instructions could result 
in severe injury or death.
If  the  ROPS  is  replaced,  make  sure  to  use  the 
proper hardware and apply the recommended 
torque values to the attaching bolts.

Never operate the mower with the seat platform

 

improperly secured. The seat platform must be 
properly secured to prevent the seat from moving/
tilting in the event of the mower tipping or rollover.

WARNING

WA

RNI

N

G

A.

ROPS post

B.

ROPS mounting bolt

Figure 3-10

Never make sudden stops or reverse direction, 
especially when maneuvering on a slope. The 
steering is designed for sensitive response. Rapid 
movement of the control levers in either direction 
could result in a reaction of the mower that can 
cause serious injury. 

DANGER

Содержание 931279CE

























































Отзывы:

Нет отзывов