HUSTLER 931279CE Скачать руководство пользователя страница 13

Страница: 13 / 56

603695CE

2-7

REV G

603391

601837

601968

DANGER:

Thrown objects!

•

Never operate the mower deck with the
rear deflector damaged, altered, or

removed.

Part Number

603391

Part Number:

601892

WARNING:

Thrown objects!

•

Always maintain a safe distance from people and
pets when mowing.

•

Always stop machine if someone enters the area.

•

Inspect area to be mowed for hazards such as
rocks, metal objects and other debris which may

be thrown or entangled by mower blades.

Remove these objects before mowing.

DANGER:

Rotating blades, pulleys & belts

•

Keep shields and covers in place
while machine is in operation

•

Keep hands, feet and clothing
away from rotating pulleys and

belts.

Part Number 601837

Part Number 601246

601246

Left
fuel
tank

Right fuel tank

OFF

WARNING:

Fluid under pressure!

Part Number 601968

•

Avoid hydraulic fluid escaping under
pressure

•

Hydraulic fluid escaping under pres-
sure can penetrate skin.

•

Hydraulic fluid escaping under pres-
sure may have sufficient force to pen-

etrate skin and cause serious injury.

Foreign fluid injected into the skin

must be surgically removed within a

few hours by a doctor, familiar with

this form of injury, or gangrene may

result.

•

Before applying pressure to hydraulic
system, make sure all connections are

tight and all hoses and lines are in

good condition.

•

Relieve all pressure in the system
before disconnecting or working on

hydraulic lines.

•

To find a leak under pressure, use a
piece of cardboard or wood – never

use your hands.

•

To relieve all pressure in system, lower
attachment and turn engine off.

WARNING:

Thrown objects!

Part Number 601624

•

Never operate the mower deck with side
deflector damaged, altered, removed or in

raised position, except when the entire

grass catcher attachment or mulching sys-

tem is being used.

WARNING:

Thrown objects!

•

Never operate the mower deck with side
deflector damaged, altered, removed or in

raised position, except when the entire

grass catcher attachment or mulching

system is being used.

Part Number 604221

DANGER:

Rotating blades, pulleys & belts

•

Keep shields and covers in place
while machine is in operation.

•

Keep hands, feet and clothing
away from rotating pulleys and

belts.

604221

Содержание 931279CE

























































Результаты поиска

Содержание 931279CE

Отзывы:

HUSTLER 931279CE, Руководство оператора, Страница: 13 / 56

Результаты поиска

Содержание 931279CE

Отзывы: