3
Cut and Plan Views
Installation
Location
The refrigerated merchandisers have been designed
for use only in air conditioned stores where temperature
and humidity are maintained at or below 75°F and 55%
relative humidity. DO NOT allow air conditioning, electric
fans, ovens, open doors or windows (etc.) to create air
currents around the merchandiser, as this will impair its
correct operation.
Product temperature should always be maintained at a
constant and proper temperature. This means that from the
time the product is received, through storage, preparation
and display, the temperature of the product must be
controlled to maximize life of the product.
Uncrating the Stand
Place the fi xture as close to its permanent position as
possible. Keep in place, attached case until ready to set/bolt
to adjoining case.
Exterior Loading
These models have
not
been structurally designed to
support external loading.
Do not walk on their tops;
This could cause serious personal injury and damage to
the fi xture.
Setting and Joining
The sectional construction of these models enable them
to be joined in line to give the effect of one continuous
display.
An Alignment pin kit is supplied with every case and must
be used in alignment.
Q3-DV
22.5° Outside
We dge
41 3/8"
31 1/16"
DRAIN
RE F. DROP
47 1/4"
9"
ELEC T.
Q3-DV
22.5° Inside Wedge
DRAIN
38 7/8
"
4
1
3
/8
"
REF.
DROP
22 3/4"
9
"
ELECT.
Q3-DV
45° Inside We dge
41 3/8"
53 3/8"
21 3/4"
12"
ELEC T.
Drain
RE F. DROP
Q3-DV
45° Outside Wedge
ELEC T.
6 3/4"
41 3/8"
38 7/16"
Drain
41 3/8"
22"
8"
6 1/8"
5"
Elect
Drain
Refrig
Q3-DV Plan View
Straight Section
25 1/8"
48" (
Variable Lengths)
50 1/4" (
Variable Lengths)
1 1/8"
End
Panels
1 1/8"
End
Panels
C
L
24 7/8"
27"
12"
14"
15 3/8"
23 3/8"
28"
52 1/8"
27 1/2"
5 3/4"
25 3/8"
10 1/4"
42 1/4"
14 3/4"
23"
15 3/4"
24 3/8"
7 1/4"
5 7/8"
8"
