Installation and Start-up
16
Observation
Possible Cause
Remedy
14. Motor burnout
Check control box for
welded starter contacts,
welded overload contacts,
or burned out heater
elements.
Replace defective components.
Oil equalization line not
preventing gas equalization
Level oil equalization line
15. On parallel
compressor
installations, oil
level does not
equalize or remain
at a constant level in
all compressors
Excessive blow by into
crankcase – worn rings,
valves, or blown gasket.
Replace gasket, valve plate, or
compressor.
Blown valve plate or
cylinder head gasket
See no. 3.
Broken suction or discharge
valve
Replace valves and valve plate, if
necessary.
Compression ratio too high
a. Check setting of low and high
pressure switches
b. Check condenser – is it
plugged
c. Check that all evaporator and
condenser fans are operating
properly.
High suction temperature
Reduce suction temperature by TXV
adjustment or provide desuperheating
Cylinder head cooling fan
not operating or incorrect
voltage to fan motor
Replace defective part or check that
available voltage agrees with fan
motor voltage.
High oil level
Lower oil level
16. Compressor
running hot
Excessive blow-by into
crankcase – worn rings,
valves, or blown gasket.
Replace gasket, valve plate, or
compressor.
Содержание Ingersoll Rand
