6-10 SERVICE
REPLACING ELECTRONIC BALLASTS
Canopy Ballast
The canopy ballast is located on top of the case, to
the left of the muffin fans.
To gain access:
1. Turn off power.
2. Remove ambient air filter.
3. Unplug wires in ballast with tool that will
release the wires..
4. Remove and replace ballast.
5. Reconnect the ballast wires.
6. Replace ambient air filter.
7. Turn on power
8. Verify proper operation of ballast.
Rail Lamp Ballast
The rail lamp ballast is located in the raceway,
behind the lower front panel at the left-hand end of
the merchandiser. NOTE: The switch for the rail
lamp is separate from the canopy and shelf light-
ing. The rail lamp switch is located on the rail.
To gain access:
1. Turn off power.
2. Remove the lower front panel by lifting it up
and out.
3. Remove screws attaching the raceway cover,
then remove cover.
4. Service or replace ballast as required.
Reassemble items as they were originally
installed.
5. Reconnect the electrical power.
6. Verify proper operation.
P/N 0416183C
Ambient Air Filter
Muffin Fan
Ballast
