These models have three honeycombs. Begin with
the center honeycomb. Work carefully—a dam-
aged honeycomb will cause merchandisers to per-
form poorly. Use a needle-nose plier to grasp one
cell membrane near one corner, Pull gently until
the bottom of the corner clears the retainer. Move
the plier further along and repeat until fingers can
grasp the side of the honeycomb. Remove the
honeycomb.
Remove the front honeycomb using the same
technique.
Remove screws in the divider heater before remov-
ing the main air honeycomb at the rear. Use care to
prevent damage to the foil bonded heater or
wiring.
Clean the honeycombs with soap and water. Be
careful not to damage honeycombs. When com-
pletely dry, re-install honeycombs in retainers.
Low Temperature
Multi-deck Frozen Food
5-3
HUSSMANN CORPORATION, Bridgeton, MO 63044-2483 U.S.A.
Screws
Divider Heater
Rear —
Main Air
Honeycomb